The Famous HDMI & RGB kit fot the Wii
Compability:WiiDual is internal hardware designed to run a custom GC-Video 2.4c by Unseen for Nintendo Wii. The following motherboard revisions are supported.
RVL-CPU-40
RVL-CPU-50
RVL-CPU-60
RVK-CPU-01 (No Gamecube Ports)
RVK-CPU-02 (No Gamecube Ports)
To determine which revision you have please follow this guide:
http://bitbuilt.net/images/guide_hub/console_modding/wii/Shank_revguide/chart.png
Features:
The WiiDual outputs analog video and HDMI simultaneously.
It can output 240p/480i/480p in all video modes.
240p/480i and can be line doubled to display 480p.
The analog portion supports the following outputs: RGBS/RGBHV/RGsB/YPbPr.
Composite sync outputs annenunted levels.
If you would like to know more about the features available with GC-Video (Like the On screen display, etc)
Please checkout Unseen's github,https://github.com/ikorb/gcvideo
Cables:
There currently is no good "off the shelf" solution for VGA.
For YPbPr you will need a standard Wii Component Cable.
If using a standard RGBS/Scart cable, it will need to be modifed to work the WiiDual.
The Color channels need to be swapped and Composite Video needs to be remove from the console.
These are both simple procedures.
Please look at this image for details on how a modified RGC cable should look: https://i.imgur.com/nwVKO9r.jpg
Retro-Access has a cable that requires no modifications.
It will also allow CSYNC over the DTerminal lines.
This will allow for Composite Video to remain intact.
This will be the recommended cable.https://retro-access.com/collections/wii/products/wiidual-csync-rgb-scart-cableInstallation
Instructions:
Please visit this page for full instructions: http://dansprojects.com/wiidual_install.html
We managed to find a small batch of kits
Wii Dual KIT = 175 Euro
INSTALLATION OF THE KIT = 60 euro
!!! Please note i'm not reselling the 'kit' , it is only available with install included !!!
Size: 46.75mm x 30.6mm
Supply Voltage: 3.3V and 5V
Video Input: Wii Digital Video
Audio Input: Wii I2S
Video Output: HDMI
Typical Current: 140mA @ 3.3V, 20mA @ 5V
This design accepts the digital video output from the Nintendo Wii and uses ikorb’s GCVideo to output a high quality, configurable HDMI output to any HDMI compatible display! All AVE-HDMI units are sent with the latest stable release of GCVideo. Currently that version is 3.1.
The AVE-HDMI can easily be installed into any Wii (excluding the Wii Mini) using the on-board vias associated with the internal digital video and audio communications.
Unlike the original version of the AVE-HDMI, this product is a kit. This kit contains the AVE-HDMI, a 150mm long flex cable, and a mini-HDMI breakout board. As of April 4th, 2023 all purchases of this kit will include an IR Sensor Board by default for Wii's that do not have a GameCube controller ports. This board can be installed in Wii's that do have GameCube controller ports, but it is not necessary.
This design can either be used directly as is or configured with the use of a universal remote or a GameCube controller. If you want to use a GameCube controller for configuration, then you can press L+R+X+Y and the configuration menu will open. GameCube controllers can only be used on Wii's that have GameCube controller inputs.
Wii Dual KIT = 110 Euro
INSTALLATION OF THE KIT = 60 euro
!!! Please note i'm not reselling the 'kit' , it is only available with install included !!!
